Description
Rohde TE145S Professional Kiln One of the Top Ten selling kilns from CTM
- Designed with high insulation for regular use at temperatures suitable for earthenware, high stoneware and porcelain firing.
- This S range kiln has floor heating to enable a more even firing temperature throughout the kiln, especially useful for tall or wide kilns.
- Can be taken apart to go through doorways as narrow as 550mm.
- Reversible kiln stand to lower or raise the kiln.
- Rohde kilns come as standard with the ST310 controller – with 32 program slots, each with two heating ramps, soak, one controlled cooling ramp and then natural cooling; it can be upgraded at the time of ordering the kiln to the ST411 controller which has 32 heating/cooling ramps and each ramp can have a soak. Both of the controllers can connect to your wifi if within range and then to the Rohde My App.
- This is a 48 amp kiln and would require an electrician fitted dedicated cable from the consumer unit / fuse board. If you have Three Phase power supply this kiln can be ordered as Three Phase
- All TE-MCC and TE-S top loading kilns come with a 63 amp cable and 63 amp commando plug. We recommend a C Type breaker to be used in the consumer unit.
- Typical lead time for manufacture and shipping to the UK is 6-8 weeks – however, WE USUALLY HAVE THIS KILN IN STOCK OR DUE IN – please ask
- If you do not need to take apart and will not wish to extend it later you might consider the new high insulation Rohde Ecotop 145S which is a highly energy efficient range only requiring 40 amps, usually cheaper as they cannot be taken apart, though do not have floor heating.
- This kiln comes with a separate electric box permanently connected to the main body of the kiln by a cable. This electric box has a final cable and commando plug attached to reach the socket / isolator. You may need an additional person to hold this box when the kiln is being moved.
